Items you will need:

Candy Molds – I picked mine up at Jo-Ann’s Craft Store.

Candy coloring in Halloween colors – Also picked up at Jo-Ann’s

White and Dark Chocolate – I used chocolate bark available at your local grocery store where the cake supplies are.

Pretzel Rods

Small painting brush – A watercolor brush worked well for me.

I bought Sprinkles but did not end up using them for this project.

I melted the white chocolate bark and added black food coloring.

Mixed up some purple using the white chocolate bark again.

Using the mold as a guide, paint the areas where you want to add the color. When you are done, set in the

refrigerator so the chocolate will harden. This takes only a few minutes.

Take the molds out of the refrigerator and set to the side. Pour some chocolate on a paper plate and

roll the pretzel rod in the chocolate.

You might find it easier to use a bowl and roll the chocolate in the bowl and pour chocolate over the pretzel.

Place the dipped pretzel in the mold then use a small spoon to drizzle

more chocolate in the spaces left in the mold. Press down lightly to set.

You might want to take a toothpick and run it around to remove the extra chocolate on the sides. When you pull them

out of the mold the image will be cleaner. Place the molds in the refrigerator for a few minutes to set.

I did not use the toothpick trick so I ended up with extra chocolate on the sides so I used a small paring

knife to sculpt the chocolate. It worked just fine. Take a look!

Success! This was my first attempt working with candy molds and

I really enjoyed it. It is time consuming but worth it! You can make

these a few days ahead of your party. I keep mine sealed in a tupperware

container on the counter.  Enjoy!

It’s all good.

~Donna

Project Items

Acrylic Paint in Orange and Black – I ended up using a Sharpie Paint Pen for the Black

Paint Brush or Sponge Brush

Clean Glass Jar

Copper Wire – I use #20 since I will hang these and it’s sturdy

Needle nose pliers

Orange and Black Beads – Optional but I like the Sparkle!

Sand

Small Candle

Paint the inside of the jar. I found it dried very quickly.

This is the Paint Sharpie I used to paint the face. It dried quickly as well and

I found it easy to use. You can use a template for the face but I went free style

as you can see….I may use a template for the next one!

These are glass beads I bought to add some sparkle! It’s all about the sparkle!

I wrapped the copper wire around the jar to measure the cut. Copper wire comes in many colors but I

choose black. I also bought some orange wire as well but settled on the black.

I added a few small beads along the wire base. I bent the wire just a little so the beads would not move around.

I measured the wire hanging loop for the cut. I wanted to hang these on

Shepards Hooks so I gave them some length.

Here is the finished product!

Hanging outside on the back deck! I added some sand to the bottom

of the jar and placed a candle inside. I was happy with the results!

Behind the scenes photo! My lighting in the kitchen is terrible. Even though I have that lovely window,

I also have tons of tall trees outside. The lamps are a huge help and very cost friendly. $7 at the Home Depot!

Anyhoo, Thanks to Martha Stewart to helping me get my craft on. Once again here is the link to the original

project.  Be Creative!

It’s all good!

~Donna